GATE EC Syllabus 2017| Electronics and Communications

0
1328
GATE EC Syllabus 2017| Electronics and Communications

GATE EC Syllabus 2017: The Graduate Aptitude Test in Engineering (GATE) is an All-India Examination conducted by the seven Indian Institutes of Technology. As the GATE 2017 Exam date is approaching, it is time for the candidates to start preparing and secure admissions for various postgraduate programs in centrally funded Indian institutions. This year GATE examination will be organised by Indian Institute of Technology Roorkee. The details shall be posted on their official website i.e www.gate.iitr.ernet.in

Electronics and Communication Engineering involves the transmission of information across channels like coax cable or optical fiber. It also deals with designing equipments such as routers, switches, fiber optics and electronic switching systems. In a nutshell, this branch of engineering deals with electronic devices and software interfaces. There is a lot of scope in the realm of electronic communications engineering such as communications engineering, electronic engineering, electronic communications technician etc.

Before heading to the GATE EC syllabus and exam pattern, have a look at the eligibility criteria and important dates for GATE 2017.

 

GATE EC Exam Pattern 2017

Before heading to the GATE EC Syllabus, we should have a look at the exam structure and pattern. The exam pattern for computer science paper of GATE 2017 is same as that of previous year’s. There will be a total of 65 questions carrying 100 marks. The question wise break up is as follows:

 Section  Question no.  No. of Questions
 General Aptitude  1-10  10
 Technical + Engineering Mathematics  1-55  55

For an in-depth analysis of the GATE Exam pattern and its marking scheme, follow the link.

GATE EC Syllabus 2017

After getting familiar with the exam pattern for electronics and communications paper of GATE 2017, let’s have a look at the section wise GATE EC syllabus:

General Aptitude(GA): Common Syllabus for all papers

The GATE EC Syllabus consists of GA section which will follow the same pattern of questions and marking scheme for all the papers of GATE 2017. This section is considered to be easy and will test your English skills and general numeric ability.

Verbal Ability: English grammar, sentence completion, verbal analogies, word groups, instructions, critical reasoning and verbal deduction.

Numerical Ability: Numerical computation, numerical estimation, numerical reasoning and data interpretation.

Section 1: Engineering Mathematics

This section of GATE EC Syllabus consists of testing your practical and theoretical skills that are typically used in the engineering industry.

  • Linear Algebra: Vector space, basis, linear dependence and independence, matrix algebra, eigen values and eigen vectors, rank, solution of linear equations – existence and uniqueness.
  • Calculus: Mean value theorems, theorems of integral calculus, evaluation of definite and improper integrals, partial derivatives, maxima and minima, multiple integrals, line, surface and volume integrals, Taylor series.
  • Differential Equations: First order equations (linear and nonlinear), higher order linear differential equations, Cauchy’s and Euler’s equations, methods of solution using variation of parameters, complementary function and particular integral, partial differential equations, variable separable method, initial and boundary value problems.
  • Vector Analysis: Vectors in plane and space, vector operations, gradient, divergence and curl, Gauss’s, Green’s and Stoke’s theorems.
  • Complex Analysis: Analytic functions, Cauchy’s integral theorem, Cauchy’s integral formula; Taylor’s and Laurent’s series, residue theorem.
  • Numerical Methods: Solution of nonlinear equations, single and multi-step methods for differential equations, convergence criteria.
  • Probability and Statistics: Mean, median, mode and standard deviation; combinatorial probability, probability distribution functions – binomial, Poisson, exponential and normal; Joint and conditional probability; Correlation and regression analysis.

Section 2: Networks, Signals and Systems

  • Network solution methods: nodal and mesh analysis; Network theorems: superposition, Thevenin and Norton’s, maximum power transfer; Wye‐Delta transformation; Steady state sinusoidal analysis using phasors; Time domain analysis of simple linear circuits; Solution of network equations using Laplace transform; Frequency domain analysis of RLC circuits; Linear 2‐port network parameters: driving point and transfer functions; State equations for networks.
  • Continuous-time signals: Fourier series and Fourier transform representations, sampling theorem and applications; Discrete-time signals: discrete-time Fourier transform (DTFT), DFT, FFT, Z-transform, interpolation of discrete-time signals; LTI systems: definition and properties, causality, stability, impulse response, convolution, poles and zeros, parallel and cascade structure, frequency response, group delay, phase delay, digital filter design techniques.

Section 3: Electronic Devices

  • Energy bands in intrinsic and extrinsic silicon; Carrier transport: diffusion current, drift current, mobility and resistivity; Generation and recombination of carriers; Poisson and continuity equations; P-N junction, Zener diode, BJT, MOS capacitor, MOSFET, LED, photo diode and solar cell; Integrated circuit fabrication process: oxidation, diffusion, ion implantation, photolithography and twin-tub CMOS process.

Section 4: Analog Circuits

  • Small signal equivalent circuits of diodes, BJTs and MOSFETs; Simple diode circuits: clipping, clamping and rectifiers; Single-stage BJT and MOSFET amplifiers: biasing, bias stability, mid-frequency small signal analysis and frequency response; BJT and MOSFET amplifiers: multi-stage, differential, feedback, power and operational; Simple op-amp circuits; Active filters; Sinusoidal oscillators: criterion for oscillation, single-transistor and opamp configurations; Function generators, wave-shaping circuits and 555 timers; Voltage reference circuits; Power supplies: ripple removal and regulation.

Section 5: Digital Circuits

  • Number systems; Combinatorial circuits: Boolean algebra, minimization of functions using Boolean identities and Karnaugh map, logic gates and their static CMOS implementations, arithmetic circuits, code converters, multiplexers, decoders and PLAs; Sequential circuits: latches and flip‐flops, counters, shift‐registers and finite state machines; Data converters: sample and hold circuits, ADCs and DACs; Semiconductor memories: ROM, SRAM, DRAM; 8-bit microprocessor (8085): architecture, programming, memory and I/O interfacing.

Section 6: Control Systems

  • Basic control system components; Feedback principle; Transfer function; Block diagram representation; Signal flow graph; Transient and steady-state analysis of LTI systems; Frequency response; Routh-Hurwitz and Nyquist stability criteria; Bode and root-locus plots; Lag, lead and lag-lead compensation; State variable model and solution of state equation of LTI systems.

Section 7: Communications

  • Random processes: autocorrelation and power spectral density, properties of white noise, filtering of random signals through LTI systems; Analog communications: amplitude modulation and demodulation, angle modulation and demodulation, spectra of AM and FM, superheterodyne receivers, circuits for analog communications; Information theory: entropy, mutual information and channel capacity theorem; Digital communications: PCM, DPCM, digital modulation schemes, amplitude, phase and frequency shift keying (ASK, PSK, FSK), QAM, MAP and ML decoding, matched filter receiver, calculation of bandwidth, SNR and BER for digital modulation; Fundamentals of error correction, Hamming codes; Timing and frequency synchronization, inter-symbol interference and its mitigation; Basics of TDMA, FDMA and CDMA.

Section 8: Electromagnetics

  • Electrostatics; Maxwell’s equations: differential and integral forms and their interpretation, boundary conditions, wave equation, Poynting vector; Plane waves and properties: reflection and refraction, polarization, phase and group velocity, propagation through various media, skin depth; Transmission lines: equations, characteristic impedance, impedance matching, impedance transformation, S-parameters, Smith chart; Waveguides: modes, boundary conditions, cut-off frequencies, dispersion relations; Antennas: antenna types, radiation pattern, gain and directivity, return loss, antenna arrays; Basics of radar; Light propagation in optical fibers.

Make efficient use of time and start preparing for the GATE examination with the help of this link. We hope this article on the latest GATE EC Syllabus provides you with necessary information. For a comprehensive exam analysis of GATE electronics and communications paper, you can head on to this link.

Stay connected for more information regarding GATE 2017. To excel in Engineering Exams, download the Best GATE Exam Preparation App for free.

Best Exam Preparation App OnlineTyari

If you have any doubts or queries, please post them in the comment section below. For better response, post your queries on OnlineTyari Community.

Write your comments

This site uses Akismet to reduce spam. Learn how your comment data is processed.